360 BULLET™ from 360 Yield Center, has a ripper point with wings that lift and fracture the complete soil profile for improved root penetration.

360 BULLET is a berm buster. Wide wings are aerodynamically positioned toward the front of the point - creating fault lines that stretch horizontally and vertically. And it does this without significantly more horsepower or wear.


The precision wing angle and pitch of the 14" wide 360 BULLET lifts and fractures the soil across the total profile, eliminating these berms to increase the roots' access to nitrogen, phosphorus, potassium, sulfur and water.

The points move a lot more soil and break a lot more compaction layers. But they do this extra work without burning a significantly larger amount of fuel or requiring much more horsepower. The vast majority of customers use the same tractor and the same gear as they do with traditional ripper points.


  • Rugged, fabricated design withstands impact. Wings are reinforced with hardening to improve wear-life and the nose cap is wear-resilient cast.
  • Aerodynamic design uses just incrementally more horsepower and fuel compared to traditional ripper points - no need to change tractors when you change to the 360 BULLET.
  • Precision wing angle and pitch lifts and fractures across the soil profile without creating compaction under the wing, eliminating undisturbed berms to provide unrestricted root access to nutrients.
We Carry Many Brands Including These

What People Are Saying

Support has never been an issue. I was able to increase efficiency on the farm without adding more operators.
Anthony Schroeder



Evan (with Precision Agri Services, Inc.) has been great to work with. Everything he told me he followed through on in a very timely response. Their product knowledge and support have been great.

Chad Tryon



Slight hills were drawing it down at C3 at around 10.0 mph going down to as low as 9.0. After the tune with AgroEcoPower we were in D1 at 12.2 mph and no draw down whatsoever.

Scott Gaier


Within thirty seconds I knew you knew what you were doing. I have no patience and I know if I call, I will get an answer. Product knowledge and service is everything.

Steve Hines

Ashville, Ohio


Evan (with Precision Agri Services, Inc.) did a great job presenting me with options on a steering system I was not satisfied with. He helped me use Ag Leader technology I Already had to Convert it to steer my 8520 John Deere. Tech support is top-notch with him.

Jake Henry



We had our 8320 ECU rewritten and are so happy we did! Tanner took the tractor from 260hp up to 305hp and it is a world of difference. We are pulling our digger faster at less rpm and can't wait to see what it will do on our vertical till!

Jeff Adams

Scott, Ohio


Just put it (Ag Leader InCommand 1200 with ISO serial bridge) to the test. Everything works really well. Each boom sections on and off, in and out of multiple different paint zones. Pretty sweet deal!

Jim Patton

Hillsboro, Ohio


Tuned John Deere 8310R with Stock HP: 311hp Tuned: 360hp and Stock Torque: 1071lb/ft. Tuned: 1244lb/ft with AgroEcoPower.

John Deere 8310R


This little workhorse just gained a few more horses [with AgroEcoPower]. I use this utility tractor for just about everything now the tractor has some more added power to complete my tasks. Stock HP: 36hpTuned 48hp with AgroEcoPower.

Massey Ferguson 1736

Belpre, Ohio

support in the field

We are farmers, too.

We’ve been where you are, and we know how important it is to be able to count on good, reliable advice. Your success is our success—which is why we treat your farm like it’s our own.

Meet Our Team