360 GLIDE™ provides reliable, mechanical, automatic positioning of your 360 Y-DROP system that ensures ideal hose position and nitrogen placement.

Your current control system is ideal for bare ground but can struggle to measure above the canopy or through leaves to maintain height. The 360 solution takes control with a simple, reliable sensor rod that mounts to the 360 Y-DROP base and constantly adjusts the 360 Y-DROP base position relative to the ground.

Three sensors plug into the center module of your current control system. That means there is no additional controller or system to learn and operate.


This rod glides over field terrain reporting the position of the 360 Y-DROP base to your boom control system. The rod flexes and pivots so it easily handles contours, turns and backing up.


The height control system is designed to adjust for terrain changes. It doesn’t react to rocks, washes, and gullies. That’s why we include a rugged breakaway system. When an obstruction is hit by the base, the smart system automatically raises and quickly returns to its operating position.

  • 360 GLIDE uses a mechanical sensor rod to automatically maintain the ideal position of the 360 Y-DROP base. That keeps the delivery hoses in the right angle to deliver nitrogen directly to the base of the corn plant.
  • 360 GLIDE is available for John Deere applicators equipped with BoomTrac Pro, Hagie and Rogator applicators with Norac UC5 and Norac UC7.
  • 360 GLIDE plugs into your existing control system and you operate it just like you control your current system. No additional monitors. No elaborate configuration or settings.

Related Products

NORAC Active Roll
Read more
NORAC Active Wing Roll
Read more
NORAC Passive Roll
Read more
NORAC Standard Control
Read more
We Carry Many Brands Including These

What People Are Saying

Support has never been an issue. I was able to increase efficiency on the farm without adding more operators.
Anthony Schroeder



Evan (with Precision Agri Services, Inc.) has been great to work with. Everything he told me he followed through on in a very timely response. Their product knowledge and support have been great.

Chad Tryon



Slight hills were drawing it down at C3 at around 10.0 mph going down to as low as 9.0. After the tune with AgroEcoPower we were in D1 at 12.2 mph and no draw down whatsoever.

Scott Gaier


Within thirty seconds I knew you knew what you were doing. I have no patience and I know if I call, I will get an answer. Product knowledge and service is everything.

Steve Hines

Ashville, Ohio


Evan (with Precision Agri Services, Inc.) did a great job presenting me with options on a steering system I was not satisfied with. He helped me use Ag Leader technology I Already had to Convert it to steer my 8520 John Deere. Tech support is top-notch with him.

Jake Henry



We had our 8320 ECU rewritten and are so happy we did! Tanner took the tractor from 260hp up to 305hp and it is a world of difference. We are pulling our digger faster at less rpm and can't wait to see what it will do on our vertical till!

Jeff Adams

Scott, Ohio


Just put it (Ag Leader InCommand 1200 with ISO serial bridge) to the test. Everything works really well. Each boom sections on and off, in and out of multiple different paint zones. Pretty sweet deal!

Jim Patton

Hillsboro, Ohio


Tuned John Deere 8310R with Stock HP: 311hp Tuned: 360hp and Stock Torque: 1071lb/ft. Tuned: 1244lb/ft with AgroEcoPower.

John Deere 8310R


This little workhorse just gained a few more horses [with AgroEcoPower]. I use this utility tractor for just about everything now the tractor has some more added power to complete my tasks. Stock HP: 36hpTuned 48hp with AgroEcoPower.

Massey Ferguson 1736

Belpre, Ohio

support in the field

We are farmers, too.

We’ve been where you are, and we know how important it is to be able to count on good, reliable advice. Your success is our success—which is why we treat your farm like it’s our own.

Meet Our Team