360 SPRINT™ system lets you re-supply nitrogen on-the-go and in the field. Like a jet refueling system, 360 SPRINT uses a modified UTV with an innovative docking system to lock onto your planter and transfer up to 300 gallons to the planter or tractor tanks.
By keeping the planter rolling, you can cover 30% more acres. Plus, you can keep the planter lighter with more frequent refills compared to "loading up" two or three times per field. That decreases planter compaction that robs you of yield.
Just guide the UTV toward the coupler and engage the transfer lock. That ensures a tight seal. Power up the fast 2" pump to transfer 300 gallons in under four minutes.
The spring-loaded receiving cone and the articulate transfer boom allow the system to flex over uneven terrain and maintain a tight seal. Once you lock on the coupler, the flexible transfer hose gives you a cushion as you adjust to bumps and speed changes on the planter.
The system includes a tandem axle and frame support structure that supports the tank and boosts the capacity of your standard UTV. These bolt-on modifications do not permanently alter the frame of your UTV and provide the support needed to carry an additional 3300 pounds to the field.
With in-field, on-the-go fills, you eliminate the travel time of the planter to the tender tank and the fill time. Cover 30% more acres, every day.
Loading the planter/tractor combination with a capacity load of liquid can amplify center compaction and pinch-row yield loss. Test show that center compaction routinely lowers yields in the center of the planter by 10 to 15%. With "just-in-time" liquid delivery, you minimize planter/tractor weight while keeping productivity high.
Hit the switch to automatically fire up the rugged Honda engine and pump system. You are in control with an array of switches to engage coupler, engine, and pump - all from the driver's seat. Engine swings out for easy fueling and services.
Evan (with Precision Agri Services, Inc.) has been great to work with. Everything he told me he followed through on in a very timely response. Their product knowledge and support have been great.
Slight hills were drawing it down at C3 at around 10.0 mph going down to as low as 9.0. After the tune with AgroEcoPower we were in D1 at 12.2 mph and no draw down whatsoever.
Within thirty seconds I knew you knew what you were doing. I have no patience and I know if I call, I will get an answer. Product knowledge and service is everything.
Evan (with Precision Agri Services, Inc.) did a great job presenting me with options on a steering system I was not satisfied with. He helped me use Ag Leader technology I Already had to Convert it to steer my 8520 John Deere. Tech support is top-notch with him.
We had our 8320 ECU rewritten and are so happy we did! Tanner took the tractor from 260hp up to 305hp and it is a world of difference. We are pulling our digger faster at less rpm and can't wait to see what it will do on our vertical till!
Just put it (Ag Leader InCommand 1200 with ISO serial bridge) to the test. Everything works really well. Each boom sections on and off, in and out of multiple different paint zones. Pretty sweet deal!
Tuned John Deere 8310R with Stock HP: 311hp Tuned: 360hp and Stock Torque: 1071lb/ft. Tuned: 1244lb/ft with AgroEcoPower.
This little workhorse just gained a few more horses [with AgroEcoPower]. I use this utility tractor for just about everything now the tractor has some more added power to complete my tasks. Stock HP: 36hpTuned 48hp with AgroEcoPower.
We’ve been where you are, and we know how important it is to be able to count on good, reliable advice. Your success is our success—which is why we treat your farm like it’s our own.Meet Our Team