RateController from Precision Planting is a critical component of any section or row-by-row vApplyHD system, but its value goes beyond that application. This rate controller adds more options to how you can use your 20|20 system by acting as a stand-alone rate controller for liquid or granular fertilizer application control.
Adjusting your liquid or granular product rates should be simple. With Precision Planting's RateController, you can easily adjust applied rates and compensate for speed changes on the go.
For many operations, planter-wide or large section control of liquid fertilizer using hydraulic motors makes a lot of sense. Using the Precision Planting RateController, you can add variable rate application to your liquid fertilizer system through using the simple to use 20|20 display.
Growers applying granular fertilizer on their planter can also take advantage of the simplicity of the 20|20 system's variable rate control using the Precision Planting RateController to control their hydraulic motor-powered granular system.
Increase the value of your 20|20 by taking control of your planter-wide fertility system and see how variable rate application can help you take the next step in higher yield potential with the Precision Planting RateController.
Evan (with Precision Agri Services, Inc.) has been great to work with. Everything he told me he followed through on in a very timely response. Their product knowledge and support have been great.
Slight hills were drawing it down at C3 at around 10.0 mph going down to as low as 9.0. After the tune with AgroEcoPower we were in D1 at 12.2 mph and no draw down whatsoever.
Within thirty seconds I knew you knew what you were doing. I have no patience and I know if I call, I will get an answer. Product knowledge and service is everything.
Evan (with Precision Agri Services, Inc.) did a great job presenting me with options on a steering system I was not satisfied with. He helped me use Ag Leader technology I Already had to Convert it to steer my 8520 John Deere. Tech support is top-notch with him.
We had our 8320 ECU rewritten and are so happy we did! Tanner took the tractor from 260hp up to 305hp and it is a world of difference. We are pulling our digger faster at less rpm and can't wait to see what it will do on our vertical till!
Just put it (Ag Leader InCommand 1200 with ISO serial bridge) to the test. Everything works really well. Each boom sections on and off, in and out of multiple different paint zones. Pretty sweet deal!
Tuned John Deere 8310R with Stock HP: 311hp Tuned: 360hp and Stock Torque: 1071lb/ft. Tuned: 1244lb/ft with AgroEcoPower.
This little workhorse just gained a few more horses [with AgroEcoPower]. I use this utility tractor for just about everything now the tractor has some more added power to complete my tasks. Stock HP: 36hpTuned 48hp with AgroEcoPower.
We’ve been where you are, and we know how important it is to be able to count on good, reliable advice. Your success is our success—which is why we treat your farm like it’s our own.Meet Our Team