Precision Planting Ready Row Unit

Ready Row Unit™ by Precision Planting is a solution that allows you to keep your existing planter frame, but upgrade to new row units and technology, for a fraction of the cost of a new planter. You’ll have the planter that you want and save a ton of money.

Don't trade planters—upgrade your current planter with new row units.

Customized to Your Farm

This row unit upgrade allows you to take your current planter, remove the row units, and add new row units that are ready to be equipped with the technology and systems that you desire. You have the ability to work with a Precision Planting dealer to customize your planter to your needs with different gauge wheels, closing systems, row cleaners, and of course the Precision Planting technology to make your newly built planter maximize each seed.


  • Cast Iron Row Unit
  • 14” parallel arms
  • 16” Disk openers
  • 11” of row unit travel
  • Gauge wheel options- 3” or 4.5”
  • Optional gauge wheel scrapers
  • Closing wheel options- rubber, cast iron, or none (add aftermarket)
  • Universal faceplate – many row cleaner and fertilizer coulter options
  • Manufactured in AGCO’s Beloit, KS factory, a state-of-the-art facility which is ISO 9001 certified for meeting strict quality standards

Related Products

Precision Planting vApply HD
Read more
Precision Planting vDrive
Read more
Precision Planting Conceal
Read more
Precision Planting vSet
Read more
Precision Planting mSet
Read more
Precision Planting CleanSweep
Read more
Precision Planting DeltaForce
Read more
Precision Planting FurrowForce
Read more
Precision Planting Keeton Seed Firmer
Read more
Precision Planting SmartDepth
Read more
Precision Planting SpeedTube
Read more
We Carry Many Brands Including These

What People Are Saying

Support has never been an issue. I was able to increase efficiency on the farm without adding more operators.
Anthony Schroeder



Evan (with Precision Agri Services, Inc.) has been great to work with. Everything he told me he followed through on in a very timely response. Their product knowledge and support have been great.

Chad Tryon



Slight hills were drawing it down at C3 at around 10.0 mph going down to as low as 9.0. After the tune with AgroEcoPower we were in D1 at 12.2 mph and no draw down whatsoever.

Scott Gaier


Within thirty seconds I knew you knew what you were doing. I have no patience and I know if I call, I will get an answer. Product knowledge and service is everything.

Steve Hines

Ashville, Ohio


Evan (with Precision Agri Services, Inc.) did a great job presenting me with options on a steering system I was not satisfied with. He helped me use Ag Leader technology I Already had to Convert it to steer my 8520 John Deere. Tech support is top-notch with him.

Jake Henry



We had our 8320 ECU rewritten and are so happy we did! Tanner took the tractor from 260hp up to 305hp and it is a world of difference. We are pulling our digger faster at less rpm and can't wait to see what it will do on our vertical till!

Jeff Adams

Scott, Ohio


Just put it (Ag Leader InCommand 1200 with ISO serial bridge) to the test. Everything works really well. Each boom sections on and off, in and out of multiple different paint zones. Pretty sweet deal!

Jim Patton

Hillsboro, Ohio


Tuned John Deere 8310R with Stock HP: 311hp Tuned: 360hp and Stock Torque: 1071lb/ft. Tuned: 1244lb/ft with AgroEcoPower.

John Deere 8310R


This little workhorse just gained a few more horses [with AgroEcoPower]. I use this utility tractor for just about everything now the tractor has some more added power to complete my tasks. Stock HP: 36hpTuned 48hp with AgroEcoPower.

Massey Ferguson 1736

Belpre, Ohio

support in the field

We are farmers, too.

We’ve been where you are, and we know how important it is to be able to count on good, reliable advice. Your success is our success—which is why we treat your farm like it’s our own.

Meet Our Team