Martin-Till ACCR1345 Row Cleaner

ACCR1345 Row Cleaners by Martin-Till are positioned in close proximity to the seed disc so the wheels stretch residue while seed disc cuts it.

Resulting in a Stretch and Cut™ cleaning method.

Compact Clean Ride short Row Cleaner comes standard with 13" Spike Wheels, without Side Treader Wheels, and without Air Cylinder.

  • Compact Design
  • ACCR1345 Perfect for high-speed or narrow rows. Measures less than 16” from the face plate uses CHU44C cast hubs and maintenance free long life 5205 double row bearing with 6 lip seal
  • Parallel linkage provides over 4” travel while maintaining a consistent wheel stance when riding over uneven ground
  • Compatible with Precision Planting Conceal™ as well as other frame-mounted openers
  • Integrated Vertical Air Cylinder brackets for CleanSweep™ or SmartClean™ cylinders purchased separately
  • Chassis is assembled at factory for easier installation onto planter row unit
  • Ductile cast linkages run on heavy-duty hardened oil impregnated bushings
  • Choice of Spikeor Razor wheels can be set up so wheels offset or intersect. Intersecting Razor wheels tear thru cover crops in seed zone
  • Additional Mounting kits available for most other row units including Case-IH 1200 series, Great Plains and more

Download PDF

Related Products

Precision Planting Conceal
Read more
Martin-Till 1360 Row Cleaners
Read more
Martin-Till ACCR1360 Row Cleaner
Read more
Martin-Till C125 Row Cleaner
Read more
Precision Planting CleanSweep
Read more
We Carry Many Brands Including These

What People Are Saying

Support has never been an issue. I was able to increase efficiency on the farm without adding more operators.
Anthony Schroeder



Evan (with Precision Agri Services, Inc.) has been great to work with. Everything he told me he followed through on in a very timely response. Their product knowledge and support have been great.

Chad Tryon



Slight hills were drawing it down at C3 at around 10.0 mph going down to as low as 9.0. After the tune with AgroEcoPower we were in D1 at 12.2 mph and no draw down whatsoever.

Scott Gaier


Within thirty seconds I knew you knew what you were doing. I have no patience and I know if I call, I will get an answer. Product knowledge and service is everything.

Steve Hines

Ashville, Ohio


Evan (with Precision Agri Services, Inc.) did a great job presenting me with options on a steering system I was not satisfied with. He helped me use Ag Leader technology I Already had to Convert it to steer my 8520 John Deere. Tech support is top-notch with him.

Jake Henry



We had our 8320 ECU rewritten and are so happy we did! Tanner took the tractor from 260hp up to 305hp and it is a world of difference. We are pulling our digger faster at less rpm and can't wait to see what it will do on our vertical till!

Jeff Adams

Scott, Ohio


Just put it (Ag Leader InCommand 1200 with ISO serial bridge) to the test. Everything works really well. Each boom sections on and off, in and out of multiple different paint zones. Pretty sweet deal!

Jim Patton

Hillsboro, Ohio


Tuned John Deere 8310R with Stock HP: 311hp Tuned: 360hp and Stock Torque: 1071lb/ft. Tuned: 1244lb/ft with AgroEcoPower.

John Deere 8310R


This little workhorse just gained a few more horses [with AgroEcoPower]. I use this utility tractor for just about everything now the tractor has some more added power to complete my tasks. Stock HP: 36hpTuned 48hp with AgroEcoPower.

Massey Ferguson 1736

Belpre, Ohio

support in the field

We are farmers, too.

We’ve been where you are, and we know how important it is to be able to count on good, reliable advice. Your success is our success—which is why we treat your farm like it’s our own.

Meet Our Team