We specialize in seed meter calibration, planter inspections and setup, and planter equipment sales, installation and training.

And with after-hours support, two fully-equipped service trucks, and a full line of parts on-hand, you can be sure you’ll get back to work faster.

Remember, however—preventative maintenance is just as important.

We offer the Harvest International Parallel arm retrofit kit for Deere XP row units for anyone looking at replacing their parallel arms for their existing planters.

Have you been paying too much attention to everything but your planter?

That’s a mistake—you may be itching to get out in the field with your silage chopper or a piece of harvesting equipment, but everything comes back to the planter.

Pay attention to your planter

To maintain good seeding depth and even emergence you need to make sure your planter frame is a) level with the ground and b) at the correct height. With corn, for example, you want to see your planter bar five to seven inches from the ground—and as close to level as you can get it. Check before planting day, then double-check in the field.

Unfortunately, you won’t be able to do it by yourself. You’re going to need to have one person driving the tractor and pulling the planter forward, and another checking on the planter bar— determining whether it's running level or pitched a little high in the front, for example, and whether the row units are running level.

Check your tractor

Can your tractor place nicely with your planter? “Of course,” you say—but maybe not if you’ve upgraded without hydraulic and electric capacity. If you can’t power new hydraulic and electrical attachments, you’ve got an issue you need to sort out… Fast.

Balance your weight

If you have a center-fill planter, the extra weight will compact center rows when you’re full of seed. You may also be light on the wings, especially if you’re not using markers. Growers often forget about the amount of weight they carry in the center of a large framed planter—if you’ve had some bad weather and the planting conditions are too wet, you’ll almost surely compact the soil around the seed zone.

Investigate your springs—or upgrade

An older planter may not be applying the correct down-force. Check the spring tension, or upgrade to a down-force system before planting day.

Look for wear

It’s good practice to look at your row units and make there’s not too much wear. Check bearings and bushings, parallel arms, and belts. And don’t forget about seed openers—if they’re worn you’ll have troubles correctly getting your seed into the bottom of the trench. It goes without saying, but we’ll say it anyway—it’s a good idea to replace worn parts before you start to plant.

Consider residue management

Residue management on the front of the planter row unit—to move residue and clods off to the side while you plant—is always a good idea. Doing so will make your seed metering device and row unit more efficient.

Summing up

All of these tips contribute to one goal: maintaining uniformity in what we call “the microenvironment”—the seed zone. The easiest way to do that? Get off the tractor and spend some quality time with your planter.

About PASI

We understand what it’s like to farm—because at Precision Agri Services, Inc., we have years of farming experience ourselves. There’s no such thing as a “set it and forget it” approach to farming, which is a truth we’ve learned first-hand.

We use the products we sell, and prove an approach in the field time and again before we recommend it to you. Even then, we’ll only make a recommendation if we can be sure it’s good for both your profitability and for the environment.

To learn more about how we can help you with your farm, contact us at 419.628.4167.

Download these “Planter tips for the busy farmer” for reference.


Other Services

We Carry Many Brands Including These
Testimonials

What People Are Saying

quote
Support has never been an issue. I was able to increase efficiency on the farm without adding more operators.
Anthony Schroeder

Ohio

quote

Evan (with Precision Agri Services, Inc.) has been great to work with. Everything he told me he followed through on in a very timely response. Their product knowledge and support have been great.

Chad Tryon

Ohio

quote

Slight hills were drawing it down at C3 at around 10.0 mph going down to as low as 9.0. After the tune with AgroEcoPower we were in D1 at 12.2 mph and no draw down whatsoever.

Scott Gaier

quote

Within thirty seconds I knew you knew what you were doing. I have no patience and I know if I call, I will get an answer. Product knowledge and service is everything.

Steve Hines

Ashville, Ohio

quote

Evan (with Precision Agri Services, Inc.) did a great job presenting me with options on a steering system I was not satisfied with. He helped me use Ag Leader technology I Already had to Convert it to steer my 8520 John Deere. Tech support is top-notch with him.

Jake Henry

Ohio

quote

We had our 8320 ECU rewritten and are so happy we did! Tanner took the tractor from 260hp up to 305hp and it is a world of difference. We are pulling our digger faster at less rpm and can't wait to see what it will do on our vertical till!

Jeff Adams

Scott, Ohio

quote

Just put it (Ag Leader InCommand 1200 with ISO serial bridge) to the test. Everything works really well. Each boom sections on and off, in and out of multiple different paint zones. Pretty sweet deal!

Jim Patton

Hillsboro, Ohio

quote

Tuned John Deere 8310R with Stock HP: 311hp Tuned: 360hp and Stock Torque: 1071lb/ft. Tuned: 1244lb/ft with AgroEcoPower.

John Deere 8310R

quote

This little workhorse just gained a few more horses [with AgroEcoPower]. I use this utility tractor for just about everything now the tractor has some more added power to complete my tasks. Stock HP: 36hpTuned 48hp with AgroEcoPower.

Massey Ferguson 1736

Belpre, Ohio

support in the field
Support

We are farmers, too.

We’ve been where you are, and we know how important it is to be able to count on good, reliable advice. Your success is our success—which is why we treat your farm like it’s our own.

Meet Our Team